OKS 1110/6 Pink - Silicone valve and packing grease

Effective sealant and non toxic lubricant for applications ranging cold and hot water valves, rubber seals, plastics.

Silicone valve and packing grease

Areas of applications

  • Lubrication of stop cocks and valve seals
  • Cold and hot water valves in plumbing and heating
  • For valves in hot and cold water lines
  • Lubrication and protection of O – Rings, rubber seals and plastic components

Advantages and benefits

  • Non-toxic, neutral to plastics, rubbers, and O-rings
  • The consistency does not change much over awide range of temperatures
  • Resistant to hot/cold water as well as to acetone, glycerine, ethylene glycol, ethanol and methanol

Technical specifications

  • Operating temperature: -40 °C → +200 °C
  • NLGI grade: 3
  • Base oil viscosity (40 °C): 9,500 mm²/s

Applications

Clean the lubricating points well for optimal effect. Apply the grease evenly and thinly to the functional surfaces with a brush, spatula, etc. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions. Only mix with suitable lubricants. Caution: Plastic based on silicone, such as silicone rubber can be attacked by silicone grease. Silicone grease may not be used at sliding points under pure oxygen influence.

  1. Other

Industries

No matter what industry you come from, we at OKS have the right solution for you.

  1. Chemical industry
  2. Iron and steel industry
  3. Rubber and plastic processing
  4. Municipal services
  5. Maintenance and servicing
  6. Automotive industry